Этот интернет-магазин использует куки. Таким образом информация о сессии или языковые настройки хранятся на вашем компьютере. Без куки диапазон функциональных возможностей интернет-магазина ограничен Если вы не согласны, пожалуйста, нажмите здесь.
Товар 1 / 3
HighRes-Download  

TRAILBLAZER RACING WHEEL FOR PS4/XBOX ONE/PS3/PC, BLACK

Номер товара: SL-450500-BK
Вес: 2.605 кг
Этого товара нет на складе. Его сначала нужно дозаказать.

Technical details

  • Игровое рулевое колесо для PlayStation® 3, 4 и ПК
  • Минимальное время переключения благодаря профессиональному рычагу переключения и качели включения сверхбыстрого доступа
  • Педали для газа и тормоза с точной дозировкой
  • Сильные вибрационные эффекты для реалистичности в игре
  • Высокоточная цифровая крестовина управления
  • 12 кнопок, свободно регулируемое распределение
  • Большой диапазон управления в 180°
  • Чувствительность регулируется
  • Прорезиненная рулевая крестовина для улучшенного удобства
  • 2 светодиода для индикации состояния режима ввода
  • 7 присосок для чрезвычайно сильного удержания
  • Блок педалей с резиновыми ножками
  • Длина кабелей: 2м (USB), 1,6м (педали)
  • Размеры крестовины управления: 264 × 252мм (Ш × В)
  • Размеры: Рулевое колесо: ок. 270 × 330 × 275мм (Ш × Г × В)
  • Блок педалей: ок. 220 × 232 × 120мм (Ш × Г × В)
  • Вес: ок. 1,45кг (рулевое колесо), 0,46кг (блок педалей)

совместимость

  • Windows 7 (32/64-Bit)
  • Windows 8 (32/64-Bit)
  • Windows 8.1 (32/64-Bit)
  • Windows 10 (32/64-Bit)
  • PS3
  • PS3 Slim
  • PS4 Slim
  • PS4
  • PS4 Pro
  • PS3 Super Slim
  • XBOX One
  • XBOX One S
  • XBOX One X

Downloads

FAQ

Where can I find drivers for this product?

Download the driver from www.speedlink.com to install the software. Always use the latest driver version.

Why am I experiencing lag with my racing wheel?

It’s normal to have a slight amount of lag of around 15° typically. This dead zone is there because of games that use a negative dead zone. Without this lag, the racing wheel would first steer in the opposite direction to the one intended.

How do I adjust the steering sensitivity?

1. Enter programming mode: Press and hold the SELECT/SHARE and START/OPTIONS buttons simultaneously (for around 3 seconds) until the green LED glows.2. Press SELECT/SHARE. The speed at which the green LED flashes indicates the current sensitivity level: Low = slow flashing; Medium = medium flashing; High = rapid flashing3. Toggle through the sensitivity levels by pressing SELECT/SHARE.4. Confirm the desired sensitivity level by pressing the D-pad up – the green LED will turn off.

Why does the racing wheel not work at all or only offer limited functionality in some games?

Keep the MODE button held depressed for three seconds to toggle between the racing wheel’s operating modes: XInput (for most current games) and DirectInput (for all older and some newer games). If the red LED (left) is lit, DirectInput mode is active; if the green LED (right) is lit, the device is in XInput mode.

My racing wheel doesn’t work with my Xbox One®

Please be aware that the TRAILBLAZER needs to be connected to the Xbox One® console using the USB cable. This was not mentioned in earlier versions of the instruction manual. We are sorry about this. Aside from this, you may experience compatibility issues with some versions of the Xbox One S® and the accompanying gamepad. If you are, download the TRAILBLAZER update program from the SPEEDLINK website at www.speedlink.com. This lets you update the racing wheel’s internal software to the latest version using a Windows PC. Following the firmware update, your TRAILBLAZER should work perfectly with your Xbox One S® again.

My racing wheel doesn’t work with my PS4®

To use the racing wheel with your PS4®, connect a PS4® controller to the racing wheel.

My gamepad, joystick or racing wheel doesn't work. How can I test its functionality?

Search in Windows® under 'Settings' for 'Set up USB gaming controllers', you should find the device listed there. Double-click the device name in the list of installed game controllers to access the input device’s settings. Test the device by pressing its buttons or moving its sticks. What you do on the device should be reflected on the test panel. You should also make sure that the right mode is chosen for the game you want to play. If the device still doesn't work, please contact our support team.

Support

Нужна дополнительная помощь?
Связаться с нами