DRIFT O.Z. Racing Wheel - for PS3, black-orange

Press and hold SELECT and START at the same time for 3 seconds. Following that, the green LED will glow.
Press the SELECT button to display the current setting: medium (green LED flashes), high (the green LED flashes quickly), low (the green LED flashes slowly).
Press the SELECT button to switch between the individual sensitivity levels.
Press the up button on the digital D-pad to confirm the setting and complete the process.

How do I assign new functions to individual buttons?
Press and hold SELECT and START at the same time for 3 seconds. Following that, the green LED will glow.
Now select the button you want to assign a new function to. Keep this button held depressed until the green LED starts to flash.
Now press the button whose current function you want to assign to the new button. The green LED will go out and the configuration process is complete.

I want to use my CARBON GT/DRIFT O.Z. racing wheel with Gran Turismo 5 – how do I do that?
Make sure your racing wheel is registered as the first controller after starting the console. You can only use the first controller to control Gran Turismo 5 in single-player mode, but in split-screen mode the second gamer can use an additional registered controller.

Is the racing wheel compatible with the PS4® and Mac®?
No, it won’t work with either the PS4® or the Mac®.

Some buttons on the racing wheel are duplicated – why?
Besides featuring pedals and shifter paddles, the racing wheel offers more buttons than the original PS3® gamepad. However, as the console doesn’t support additional buttons, some are duplicated. This ensures all functions are easily accessible.

Why am I experiencing lag with my racing wheel?
It’s normal to have a slight amount of lag of around 15° typically. This dead zone is there because of games that use a negative dead zone. Without this lag, the racing wheel would first steer in the opposite direction to the one intended.

Why do the pedals only work digitally on the PC and how can I change that?
The pedals are factory set digitally. To use the pedals in the analog mode, press select + start simultaneously for approximately 3 seconds, then press the left arrow key on the Control Pad.

Why does the racing wheel not work at all or only offer limited functionality in some games?
Keep the MODE button held depressed for three seconds to toggle between the racing wheel’s operating modes: XInput (for most current games) and DirectInput (for all older and some newer games). If the red LED (left) is lit, DirectInput mode is active; if the green LED (right) is lit, the device is in XInput mode.