Medusa 5.1 Twin Set
Support only
Currently not available
Product number:
SL-8792
Highlight
Perfectly suited for dvds and action games and every sort of voice application! A unique Twin Set with two headsets and one amplifier box. Enjoy 5.1 sound via two separate headsets. Front, rear, center and subwoofer loudspeakers are integrated in each ear-pad! The enclosed amplifier box provides a practical volume control, an On/Off switch, three 3,5mm jacks and two earphone jacks.
More information as download
Can I connect the Medusa Headset (SL-8790) to an optical sound card output?
The headset cannot be connected to an optical output, as it disposes only of analogue inputs.
How long is the cable of the SL-8790 Medusa Headset ?
The cable length is 4,00 meters.
I have only very little bass.
Please turn off the CMSS-3D function in the software of the soundcard.
On my Asus Mainboard A7V8X center and woofer signal are mixed up.
Please open AC 97 audio configuration. Activate ″Mix up Center/Subwoofer signal″ with a tick.
the Amplifier causes a buzzing, beeping or clicking sound coming.
nother piece of electrical equipment is interfering with the amp. Try turning off other items one by one until you work out which one it is. Usual culprit is a wireless router, infrared mouse transmitter or mobile phone cradle.
The Center/Sub channels are reversed.
a) Software: Look for Bass Re-direction or similar wording.
b) Hardware:
1) Connect cable A (manual, page 3) to your sound card as usual. Connect the front and rear channels to the amplifier box.
2) Connect the the other end of the sub/center 3.5mm jack plug of cable A to cable C.
3) Connect cable C with cable B, so that the white RCA plug is coupled to the red RCA connector, and vice versa.
4) Connect cable B to the sub/center input of the amplifier box.
The headset microphone is very quiet – how can I increase the recording level?
To do this, enable ‘Microphone Boost’ or ‘Microphone Boost Control’. In the majority of Windows® systems, you’ll find this function in the Control Panel under the ‘Sound’ option – ‘Recording’; in some cases it may even be located in a submenu. That said, this function might not be available on some systems depending on your sound card.
The sound output provides a distorted sound.
This is usually caused by having the in-line volume controls on the headset turned down to low and the volume on the amplifier too high to compensate. Please set the in-line controls to at least 6.
The headset cannot be connected to an optical output, as it disposes only of analogue inputs.
How long is the cable of the SL-8790 Medusa Headset ?
The cable length is 4,00 meters.
I have only very little bass.
Please turn off the CMSS-3D function in the software of the soundcard.
On my Asus Mainboard A7V8X center and woofer signal are mixed up.
Please open AC 97 audio configuration. Activate ″Mix up Center/Subwoofer signal″ with a tick.
the Amplifier causes a buzzing, beeping or clicking sound coming.
nother piece of electrical equipment is interfering with the amp. Try turning off other items one by one until you work out which one it is. Usual culprit is a wireless router, infrared mouse transmitter or mobile phone cradle.
The Center/Sub channels are reversed.
a) Software: Look for Bass Re-direction or similar wording.
b) Hardware:
1) Connect cable A (manual, page 3) to your sound card as usual. Connect the front and rear channels to the amplifier box.
2) Connect the the other end of the sub/center 3.5mm jack plug of cable A to cable C.
3) Connect cable C with cable B, so that the white RCA plug is coupled to the red RCA connector, and vice versa.
4) Connect cable B to the sub/center input of the amplifier box.
The headset microphone is very quiet – how can I increase the recording level?
To do this, enable ‘Microphone Boost’ or ‘Microphone Boost Control’. In the majority of Windows® systems, you’ll find this function in the Control Panel under the ‘Sound’ option – ‘Recording’; in some cases it may even be located in a submenu. That said, this function might not be available on some systems depending on your sound card.
The sound output provides a distorted sound.
This is usually caused by having the in-line volume controls on the headset turned down to low and the volume on the amplifier too high to compensate. Please set the in-line controls to at least 6.
- EAN: 4027301087925
- Product Number: SL-8792
- The 5.1 Sound double pack
- two Medusa 5.1 headsets
- one amplifier (volume control, on/off switch, 2 earphone jacks, 3x3.5mm jack)
- microphones
- adjustable head bands
- collapsible earpads
- in-line remote control (Rear/Front/Center Volume, bass).